Manufacturing

Whether the machining method of motor shaft is improved and the influence of concentricity

Motor shaft machining is the processing of motor shaft. The main purpose of raising this question is to solve the problem and lead to the content of this article, so that everyone can learn in a targeted manner, thus improving learning efficiency and achieving good learning results.

09-22

2020

Whether the machining method of motor shaft is improved and the influence of concentricity
Whether the machining method of motor shaft is improved and the influence of concentricity

What is the reason for the large axial vibration of the motor?

Small motor shafts usually have the characteristics of high speed, frequent starting and easy heating during work. Reasonable material selection and heat treatment are important tasks for every designer. Appropriate heat treatment methods usually require only half the effort to obtain twice the results.

09-16

2020

What is the reason for the large axial vibration of the motor?
What is the reason for the large axial vibration of the motor?

Attention to Details in Motor Shaft Machining

Motor shaft manufacturers analysis With the continuous development of society, there are many processes around us. Among them, we are more familiar with motor shaft processing, and its existence has brought great convenience to our lives. Before processing the motor shaft, you must carefully read its instruction manual and understand the specific operation method to avoid more problems during use. Today, Xiao Bian is here to learn more about the processing of motor shafts.

09-11

2020

Attention to Details in Motor Shaft Machining
Attention to Details in Motor Shaft Machining

How is the motor rotor shaft more suitable for on-site maintenance?

Three and recommend motor rotor shaft wear reasons: There are many reasons for the wear of the motor rotor shaft. The main forms of wear are adhesive wear, abrasive wear, fatigue wear, fretting wear, etc., with poor impact resistance and poor fatigue resistance, which is easy to cause wear of bearing position and bearing chamber.

09-07

2020

How is the motor rotor shaft more suitable for on-site maintenance?
How is the motor rotor shaft more suitable for on-site maintenance?

An empirical method for on-line repair of generator rotor shaft wear

There is an interference fit between the bearing on the drive side of the generator and the rotor shaft. Due to the material problem of the shaft itself and the process of repeatedly replacing the bearing, the dimensional accuracy of the rotor shaft will be slightly worn. In addition, metal fatigue of equipment may also be caused by uninterrupted operation throughout the year. The gap affects the accuracy of the fit. Once the gap is created and the bearing lubrication is insufficient, the wear of the bearing position will be very fast. The axial fixing method of the part is fixed by an elastic fixing ring. If the journal is worn, it is usually accompanied by axial wear. will eventually cause the device to stop unexpectedly.

09-02

2020

An empirical method for on-line repair of generator rotor shaft wear
An empirical method for on-line repair of generator rotor shaft wear

What are the application plans for precision shaft machining? Axis core-micro shaft

Precision axis machining introduces you to the application planning of CNC fine machining: 1. High-speed, precision CNC lathes, turning centers and compound processing machines with linkage devices above four axes. First of all, it is necessary to meet the needs of the aerospace, aviation, instrumentation, appearance, electronic information and bioengineering industries.

08-28

2020

What are the application plans for precision shaft machining? Axis core-micro shaft
What are the application plans for precision shaft machining? Axis core-micro shaft
< 1...232425...35 >