Manufacturing

Guide rod: the basics of screw assembly

Guide rod: Basic knowledge of screw combination: Conveying element: Conveying element is threaded, and its function is to transport materials (including liquid materials). The shape of the spiral groove can be rectangular or special shapes produced according to the principle of relative movement (meshing type). Threaded components are divided into two types: forward and reverse, which can be divided into single-head, double-head and three-head threaded components.

10-21

2020

Guide rod: the basics of screw assembly
Guide rod: the basics of screw assembly

Guide rod: what are the factors that affect the screw injection molding

The factors that affect the recommend screw of the guide rod manufacturer: ① The relationship between the screw speed and the production capacity, the speed is proportional to the production capacity of the equipment. Productivity basis This depends on the rotational speed, nose and rod geometry. It has also been confirmed in production. Inside a certain speed range, the production capacity is basically proportional to the rotation speed of the rod.

10-12

2020

Guide rod: what are the factors that affect the screw injection molding
Guide rod: what are the factors that affect the screw injection molding

Technical requirements for stainless steel shaft

1. Stainless steel shaft machining accuracy 1) Dimensional accuracy. The dimensional accuracy of stainless steel shaft parts mainly refers to the dimensional accuracy of shaft diameter and shaft length. According to the application requirements, the dimensional accuracy of the main journal diameter is usually IT6-IT9, and the stainless steel journal can also reach IT5. The length of the shaft is usually specified as a nominal size, and corresponding tolerances can be given to the length of each step of the stepped shaft according to the requirements of use.

10-09

2020

Technical requirements for stainless steel shaft
Technical requirements for stainless steel shaft

Advantages of stainless steel bearings and the difference between stainless steel shaft 304 and 440 materials

Advantages of 1. stainless steel bearings 1. Excellent corrosion resistance: Stainless steel bearings are not easy to rust and have strong corrosion resistance. 2. Washable: Stainless steel bearings can be cleaned without cleaning to avoid rust.

10-09

2020

Advantages of stainless steel bearings and the difference between stainless steel shaft 304 and 440 materials
Advantages of stainless steel bearings and the difference between stainless steel shaft 304 and 440 materials

Particular requirements for motor shaft drilling and performance improvement

The machining of the motor shaft may be referred to as motor shaft machining. It is one of the keywords of the website, so this work will be done below so that everyone can understand and understand, and at the same time increase their own expertise in this field, so as not to stop in place.

09-26

2020

Particular requirements for motor shaft drilling and performance improvement
Particular requirements for motor shaft drilling and performance improvement

Whether the machining method of motor shaft is improved and the influence of concentricity

Motor shaft machining is the processing of motor shaft. The main purpose of raising this question is to solve the problem and lead to the content of this article, so that everyone can learn in a targeted manner, thus improving learning efficiency and achieving good learning results.

09-22

2020

Whether the machining method of motor shaft is improved and the influence of concentricity
Whether the machining method of motor shaft is improved and the influence of concentricity
< 1...222324...35 >