Some knowledge of plunger metering pump
1. Hydraulic diaphragm transmission mechanism
The power of the motor is transmitted to the worm and worm gear to realize the deceleration rotation, so that the crankshaft connecting rod mechanism reciprocates and drives the plunger to generate hydraulic pressure. The stroke adjustment mechanism is composed of a crankshaft, an eccentric wheel, an adjusting nut, an adjusting screw, an adjusting hand wheel (handle), a dial (pointer) and a scale. The relative stroke of the plunger is realized by changing the eccentricity.
2. Hydraulic system
(1) The hydraulic system of the hydraulic diaphragm metering pump is composed of plunger, cylinder block, cylinder head, inlet and outlet valves, hydraulic diaphragm and three valves (ie bleed overload valve, limit valve and compensation valve). In operation, the diaphragm separates the hydraulic oil from the medium, so the hydraulic diaphragm metering pump has the advantage of no leakage.
Hydraulic diaphragm metering pump hydraulic endThe plunger is driven by the reciprocating motion of the crank connecting rod mechanism at the transmission end. The plunger reciprocates in the hydraulic cavity to change the pressure of the hydraulic oil, deflect the hydraulic diaphragm, and transport the medium. The relative stability of the hydraulic oil in the hydraulic chamber is maintained by the action of three valves.
The overload valve automatically discharges the gas in the hydraulic oil into the hydraulic cavity to ensure smooth work, avoid overpressure caused by excessive hydraulic oil or blockage of the discharge pipeline, and automatically open the load valve to achieve the purpose of protection.
The limit compensation device uses the hydraulic diaphragm to push the limit valve to open, and replenishes the oil at any time according to the vacuum degree in the hydraulic cavity to ensure that the hydraulic oil in the hydraulic cavity is full.
3. Electromagnetic diaphragm
The electromagnetic metering pump uses the electromagnetic push rod to drive the diaphragm to reciprocate in the pump head, so that the volume and pressure of the pump head cavity change. The pressure change causes the opening and closing of the suction valve and the drain valve, so as to realize the quantitative suction and discharge of the liquid.
Electromagnetic metering pump is welcomed by the industry because of its simple structure, low energy consumption, accurate measurement and convenient adjustment. Its design principle is"Simple and practical", but the disadvantage is that the metering flow rate is small (usually less than 90 liters/hour) and the pipeline pressure requirement is low, which limits its industrial application in some aspects.
Application: Electromagnetic metering pumps are widely used in petroleum, chemical, electro-metallurgy, mining, shipbuilding, light industry, agriculture, civil and national defense departments.
4. Mechanical plunger
Generally, there are two kinds of valve pump and valveless pump. Plunger metering pump is widely used in petrochemical industry because of its simple structure, high temperature and high pressure resistance. In view of the shortcomings of ordinary plunger pumps in high-pressure delivery of high-viscosity media, valveless rotary plunger metering pumps have received more and more attention, and are widely used in the metering of high-viscosity media such as syrup, chocolate, cement grinding aids, and petroleum additives. Due to the structural defect that the measured medium cannot be completely isolated from the lubricant in the pump, the plunger metering pump is limited in fluid metering applications with high anti-pollution requirements.
Plunger
Other Content
2024-01-02
WeChat Public Number
Address:
Foreign companies
Established:April 20, 1994