Technical strength of TNK

Information dynamics

Explain the role of the shaft core?

Axis the development prospects of this industry is very good, because in the use of the benefits for the enterprise more, so by the customers of all ages, in order to make you more familiar with it, then we will talk about the role of the axis.

2022

12-28

What are the main points of using the shaft core?

The shaft core is widely used, because of its various advantages, it is recognized by everyone, and it is easier to operate. Only in strict accordance with the operating regulations to use, in order to achieve good results, let's understand the use of the main points of the shaft core.

2022

12-19

What are the advantages of shaft core? Come and collect!

The double-axis high-speed guide rail is composed of a high-speed motion slider composed of an aluminum alloy body and a steel guide shaft core embedded in it, and a box-type sliding unit composed of a shaft core and a roller. It has low cost, high speed, and low noise. It is widely used in the machinery industry.

2022

12-08

How to improve the quality of the shaft core, come and collect!

The quality of the precision shaft core, whether it is the designer and manufacturer, the designer of the parts, or the user of the precision shaft core, should be actively concerned. With the continuous innovation of technology, the wide use of new materials, the continuous change of processing technology, the difference of the use and maintenance conditions, etc., all affect the quality of the precision shaft core to varying degrees.

2022

11-28

Causes and treatment methods of external leakage of rotor shaft

As we all know, the air compressor shaft seal has just been put into use and the sealing effect is good, but due to the aging of the sealing material, the air compressor overhaul and other reasons, there will be a common phenomenon of shaft seal leakage and air compressor. Leakage not only affects the normal operation of the unit, but also pollutes the surrounding environment. So, do you know the reasons for the leakage of the rotor shaft seal and what are the treatment methods.

2022

11-18

How to repair rotor shaft wear

The motor rotor shaft is a rotating part of the motor and a conversion device that realizes electrical energy, mechanical energy, electrical energy and electrical energy. The rotor shaft is often damaged by wear and impact during work and maintenance. As the central part of the motor structure, the rotor shaft is responsible for the dimensional coordination and installation of the various components of the motor. If it can be repaired in time, the motor rotor shaft can continue to be used after wear, saving part of the cost of replacing equipment.

2022

11-08

Characteristics and Main Causes of Rotor Shaft Unbalance

However, the quality axis in the rotor shaft length L is parallel to the rotating axis, so it will cause imbalance in a separate plane. The rolling bearings at both ends in the centripetal force effect area have the same size and orientation, and need to be balanced and corrected by a separate plane view. B) Symmetrical imbalance:-The quality axis of the rotor does not overlap with the rotation axis, but intersects with the center of gravity of the rotor. The centripetal force generated is the same and acts on the rolling bearings on both sides in opposite directions at 180 degrees.

2022

10-31

The motor rotor shaft of the steel industry is worn out

The rotor shaft of a motor in an iron and steel industry is worn out. The specific conditions are as follows: wear position: rolling bearing position and sealing position on the transmission system side; Wear condition: the rolling bearing position is worn by 05mm, and the total wear width is 75mm. Solay carbon nano composite material repair technology is the use of raw materials unique physical properties and targeted repair processing technology to repair a variety of shaft wear problems.

2022

10-19

How to solve the problem of rotor shaft beating of roots drum centrifugal fan?

The rotor shaft with large original unbalance may have unpredictable risks when running at high speed, so it is necessary to carry out dynamic balance correction for the rotor. The roots blower is installed with the bearing motor shaft as the supporting point. After calibrating the center holes at both ends of the shaft, place the rotor on the edge of the numerical control lathe and put the rotor on the accurate measurement rack with contour brackets on both sides.

2022

10-09

The purpose and function of the guide rod

The purpose and function of the guide rod. The guide rod (ball screw), also known as the guide screw, is a mechanical part that moves between the steel ball nut and the screw. The traditional screw sliding contact is converted into rolling contact and then the steel ball is rotated in the nut. The motion is converted into linear motion transmission.

2022

09-29

< 1...678...21 > proceed page