Technical strength of TNK

Information dynamics

What is the reason for the large axial vibration of the motor?

Small motor shafts usually have the characteristics of high speed, frequent starting and easy heating during work. Reasonable material selection and heat treatment are important tasks for every designer. Appropriate heat treatment methods usually require only half the effort to obtain twice the results.

2020

09-16

Attention to Details in Motor Shaft Machining

Motor shaft manufacturers analysis With the continuous development of society, there are many processes around us. Among them, we are more familiar with motor shaft processing, and its existence has brought great convenience to our lives. Before processing the motor shaft, you must carefully read its instruction manual and understand the specific operation method to avoid more problems during use. Today, Xiao Bian is here to learn more about the processing of motor shafts.

2020

09-11

How is the motor rotor shaft more suitable for on-site maintenance?

Three and recommend motor rotor shaft wear reasons: There are many reasons for the wear of the motor rotor shaft. The main forms of wear are adhesive wear, abrasive wear, fatigue wear, fretting wear, etc., with poor impact resistance and poor fatigue resistance, which is easy to cause wear of bearing position and bearing chamber.

2020

09-07

An empirical method for on-line repair of generator rotor shaft wear

There is an interference fit between the bearing on the drive side of the generator and the rotor shaft. Due to the material problem of the shaft itself and the process of repeatedly replacing the bearing, the dimensional accuracy of the rotor shaft will be slightly worn. In addition, metal fatigue of equipment may also be caused by uninterrupted operation throughout the year. The gap affects the accuracy of the fit. Once the gap is created and the bearing lubrication is insufficient, the wear of the bearing position will be very fast. The axial fixing method of the part is fixed by an elastic fixing ring. If the journal is worn, it is usually accompanied by axial wear. will eventually cause the device to stop unexpectedly.

2020

09-02

What are the application plans for precision shaft machining? Axis core-micro shaft

Precision axis machining introduces you to the application planning of CNC fine machining: 1. High-speed, precision CNC lathes, turning centers and compound processing machines with linkage devices above four axes. First of all, it is necessary to meet the needs of the aerospace, aviation, instrumentation, appearance, electronic information and bioengineering industries.

2020

08-28

Causes and Solutions of Unsmooth Rotation of Precision Shaft

2020

08-27

Stainless steel rod material commonly used for precision shaft parts, shaft core-rotor shaft

Sanhe recommend precision shaft parts commonly used stainless steel rod material: shaft parts should be based on different working conditions and requirements, choose different materials, using different heat treatment specifications (such as quenching and tempering, normalizing, quenching, etc.), in order to obtain a certain strength, toughness and wear resistance.

2020

08-21

Micro shaft: how to improve the processing technology of the shaft? Rotor shaft-shaft

Micro-axis machining is when the technical effect is not satisfactory, we can make improvements in order to obtain the desired effect! So do you know how to improve the shaft processing process?

2020

08-12

Micro shaft: What are the high quality selection criteria for shaft machining? Rotor shaft-rotating shaft

With the progress of society and the progress of science, our technicians have invented a variety of products for us to use. Printer output shaft processing is one of them. So, what is the quality selection standard of shaft processing? Let Xiaobian explain in detail for us!

2020

08-07

Brief Analysis of the Overview of Micro Shaft

The micro shaft is relatively small and has high precision. Some are also called precision shafts, small shafts, axles, rotor shafts, pins, rivets, guide rods, etc. The main materials are carbon steel, stainless steel, copper, aluminum, etc. The surface treatment mainly includes galvanizing, nickel, blackening, carburizing and so on. Some industries also require salt spray testing to prevent rust day and night. The main processing procedures are punching, grinding, surface treatment, turning, classification, packaging, etc.

2020

08-03

< 1...111213...17 > proceed page